NETGEAR M4250-26G4XF-PoE+: rear panel, ports and setup guide
The M4250-26G4XF-PoE+ (GSM4230PX) is a 1U AV Line managed switch with 24 gigabit PoE+ ports on a 480 W budget and four 10G SFP+ uplinks. Click any port on the rear panel below to see what it does, then read on for the specs, power, fan modes and how it compares with the rest of the M4250 series.
- 1U rackmount
- 24 x 1G PoE+
- 480 W PoE
- 2 x 1G RJ45
- 4 x 10G SFP+
- 132 Gbps
M4250-26G4XF-PoE+ specifications
| Model number | GSM4230PX (for example GSM4230PX-100NAS in the Americas) |
| Form factor | 1U rackmount, ports on the rear (reversible) |
| PoE ports | 24 x 10/100/1000 RJ45, 802.3at PoE+ |
| PoE budget | 480 W |
| Other copper | 2 x 10/100/1000 RJ45 (ports 25 and 26) |
| Uplinks | 4 x 1000/10GBASE-X SFP+ |
| Switching fabric | 132 Gbps non-blocking across 30 ports, 98.21 Mpps |
| Management | 1G out-of-band port, RJ45 RS232 and USB-C console (rear), USB-A storage (front) |
| Power | 1 internal fixed PSU, C14 inlet with on/off switch |
| Power draw | 46.8 W with no PoE load, about 614 W at full PoE |
| Heat output | 159.8 BTU/hr idle PoE, 2,096 BTU/hr at full PoE |
| Fan modes | Fan off up to 45 W PoE (8 ports, no SFP+), Quiet about 25 dBA up to 350 W, Cool about 67 dBA |
| Dimensions (W x H x D) | 440 x 43.2 x 400 mm (17.3 x 1.7 x 15.7 in.) |
| Weight | 5.45 kg (12.02 lb) |
| Rear brackets | Optional RBS1830-10000S for 4-post racks 18 to 30 in. deep |
Every port on the rear panel, explained
Click a card to light up those ports on the panel above.
24 PoE+ ports24 on the panel
Ports 1 to 24 are 10/100/1000 RJ45 in two blocks of 12, odd numbers on top and even on the bottom.
Each port delivers 802.3af (15.4 W) or 802.3at PoE+ (30 W), sharing a 480 W budget across the switch.
2 extra gigabit RJ45 ports2 on the panel
Ports 25 and 26 are stacked to the right of the PoE blocks. They are 10/100/1000 RJ45 without PoE, useful for a control processor, a second switch or an internet link.
4 SFP+ uplinks4 on the panel
Ports 27 to 30 are SFP+ cages in two stacked pairs. Each runs at 1G or 10G, so this model suits video systems that aggregate many encoders onto a 10G core.
Out-of-band management port1 on the panel
The RJ45 marked OOB, on the far left of the rear panel. It is a 1G service port for a separate management network, so you can reach the switch even if the AV VLANs are down.
RJ45 serial console1 on the panel
The RJ45 marked CONSOLE is an RS232 straight-through serial console for local command line access.
USB-C console1 on the panel
The USB-C port next to it is a second console option, handy for a laptop with no serial adapter. The USB-A storage port and a USB-C LED extension port are on the front display panel.
Power inlet1 on the panel
One internal, fixed power supply with a C14 inlet and an on/off switch, on the right side of the rear panel.
Lights and buttons
- Status lights: Power, Fan and PoE LEDs sit at the far left of the rear panel, next to a recessed Reset button. The front display panel shows status too.
- Port numbers are printed above and below each port, so the rear matches the port list in the AV and IT web interfaces.
M4250-26G4XF-PoE+ power, PoE and fans
The 480 W budget covers all 24 ports at 20 W each, or 16 ports at the full 30 W of PoE+. That is enough for most rooms full of AV-over-IP endpoints, cameras and access points.
| Fan mode | When it applies | Noise at 25 C |
|---|---|---|
| Fan off | PoE load up to about 45 W on 8 ports, no SFP+ modules | 0 dBA |
| Quiet | PoE load up to about 350 W | About 25 dBA |
| Cool | Any load | About 67 dBA |
It draws 46.8 W with no PoE load and about 614 W at full PoE, or roughly 2,096 BTU/hr of heat to plan for.
Compare the M4250 series
One datasheet covers 13 M4250 models. They share the same software, AV profiles and management ports, and differ in size, port mix and PoE budget.
| Model | Form factor | Copper ports | Uplinks | PoE budget |
|---|---|---|---|---|
| M4250-9G1F-PoE+ | Desktop | 8 x 1G PoE+, 1 x 1G | 1 x SFP (1G) | 110 W |
| M4250-8G2XF-PoE+ | Desktop | 8 x 1G PoE+ | 2 x SFP+ (1G/10G) | 220 W |
| M4250-10G2F-PoE+ | 1U | 8 x 1G PoE+, 2 x 1G | 2 x SFP (1G) | 125 W |
| M4250-10G2XF-PoE+ | 1U | 8 x 1G PoE+, 2 x 1G | 2 x SFP+ (1G/10G) | 240 W |
| M4250-10G2XF-PoE++ | 1U | 8 x 1G PoE++, 2 x 1G | 2 x SFP+ (1G/10G) | 720 W |
| M4250-26G4F-PoE+ | 1U | 24 x 1G PoE+, 2 x 1G | 4 x SFP (1G) | 300 W |
| M4250-26G4F-PoE++ | 1U | 24 x 1G PoE++, 2 x 1G | 4 x SFP (1G) | 720 W (1 PSU), 1,440 W (2 PSU) |
| M4250-26G4XF-PoE+ | 1U | 24 x 1G PoE+, 2 x 1G | 4 x SFP+ (1G/10G) | 480 W |
| M4250-40G8F-PoE+ | 1U | 40 x 1G PoE+ | 8 x SFP (1G) | 480 W |
| M4250-40G8XF-PoE+ | 1U | 40 x 1G PoE+ | 8 x SFP+ (1G/10G) | 960 W |
| M4250-40G8XF-PoE++ | 2U | 40 x 1G PoE++ | 8 x SFP+ (1G/10G) | 720 W to 2,880 W (1 to 3 PSU) |
| M4250-12M2XF | 1U | 12 x 100M/1G/2.5G | 2 x SFP+ (1G/10G) | None |
| M4250-16XF | 1U | None | 16 x SFP+ (10G; first 12 also 1G) | None |
M4250 AV profiles and the AV web interface
Every M4250 ships pre-configured for audio and video over IP, so encoders and decoders can be plugged in and work without setup. IGMP Plus is on by default on VLAN 1, which keeps multicast video from flooding the network.
- AV web interface: browse to the switch's IP address on port 8080 for the AV-specific settings. The regular IT web interface and a CLI are there too.
- Audio profiles: Dante, Q-SYS, AES67 and AVB are built in.
- Video profiles: NVX, AMX, Q-SYS, NDI, Kramer KDS, Aurora Multimedia, ZeeVee, Atlona, Dante, SDVoE and more, plus mixed audio, video and control profiles. Profiles are color coded and applied per port.
- Switch-to-switch links: with Auto-Trunk and Auto-LAG, two M4250s connected together trunk their VLANs and bundle multiple links automatically.
- Fleet management: the NETGEAR Engage controller manages M4250, M4300, M4350 and M4500 switches together.
M4250 management ports
All M4250 models share the same set of management ports, though where they sit (front or back) depends on the model.
- Console: an RJ45 RS232 straight-through serial port and a USB-C console port, for local CLI access.
- Out-of-band Ethernet: a 1G service port for a separate management network.
- USB-A storage: for logs, packet captures, configuration files and firmware images.
- Dual firmware: two firmware images and two configuration files, so updates cause minimal downtime.
Mounting and fan modes
- Rackmount models can be mounted reversed when you want the ports facing the front of the rack. A second, included pair of ears sets the switch back 2 in. (about 5 cm) to leave room for cables.
- Threaded holes underneath (4 x M5 on a 50 x 100 mm VESA pattern) and on the front (1 x M10 for clamps) allow mounting outside a rack.
- Desktop models are meant for conference rooms, mobile studios, under a table or behind a screen, and mount with side flanges.
- Fans are software controlled. Most models can switch the fans off entirely when the room temperature and PoE load are low enough, and offer Quiet and Cool modes otherwise. The M4250-9G1F-PoE+ is fanless.
Fan-off mode depends on ambient temperature and PoE load. Check your model's limits before closing it inside a cabinet or ceiling space.
Frequently asked questions
What is the PoE budget of the NETGEAR M4250-26G4XF-PoE+?+
480 W, shared across its 24 PoE+ ports. Each port can deliver up to 30 W.
What is the difference between the M4250-26G4XF-PoE+ and the M4250-26G4F-PoE+?+
The XF model has four 10G SFP+ uplinks instead of 1G SFP, a 480 W PoE budget instead of 300 W, and a 132 Gbps fabric instead of 60 Gbps.
Do the SFP+ ports on the M4250-26G4XF-PoE+ accept 1G modules?+
Yes. Each of the four SFP+ ports runs at 1G or 10G.
What is the model number of the M4250-26G4XF-PoE+?+
GSM4230PX, sold as GSM4230PX-100NAS in the Americas and with other regional suffixes elsewhere.
How do I open the M4250 AV interface?+
Browse to the switch's IP address followed by :8080. The standard IT web interface is on the normal port.
Which audio protocols do M4250 switches support out of the box?+
Dante, Q-SYS, AES67 and AVB profiles are built in, and AVB supports up to 256 streams per switch.
Can the M4250 run with its fans off?+
Yes on most models, when the ambient temperature and PoE load are low enough. The switch also has Quiet and Cool fan modes, and the M4250-9G1F-PoE+ has no fans at all.
Plan this av network switch in your rack
The M4250-26G4XF-PoE+ is in the Netgear library for DaMatrix, with every port mapped so you can drag it into a rack, patch it and print the documentation.
Related Netgear devices
- Netgear AC1900
- Netgear GS108T
- Netgear GS728TP
- NETGEAR M4250-10G2F-POE+
- NETGEAR M4250-10G2XF-PoE+
- NETGEAR M4250-10G2XF-PoE++
- NETGEAR M4250-12M2XF
- NETGEAR M4250-16XF
- NETGEAR M4250-26G4F-PoE+
- NETGEAR M4250-26G4F-PoE++
- NETGEAR M4250-40G8F-PoE+
- NETGEAR M4250-40G8XF-PoE+
- NETGEAR M4250-40G8XF-PoE++
- NETGEAR M4250-8G2XF-PoE+
- NETGEAR M4250-9G1F-PoE+
- Netgear Nighthawk CAX30
- Netgear Nighthawk rS700S
Summarized from the NETGEAR M4250 Series AV Line Managed Switches Datasheet. This page is a quick reference; check the full manual for safety warnings and model-specific limits.