Device guide · Rack server

Dell PowerEdge R620: rear panel, ports and setup guide

The PowerEdge R620 is a 1U, one or two socket rack server with 24 DIMM slots, up to ten 2.5 in. drives and four built-in NICs. Click any port on the rear panel below to see what it does, then read on for the specs, memory limits, power supply options and LED codes people look up most.

  • 1U rack server
  • Up to 2 Xeon E5-2600 / v2
  • Up to 1.5 TB RAM
  • 24 DIMM slots
  • 4 NICs
  • iDRAC7
Rear panel, drawn to scaleInteractive
Server - PowerEdge R620 (rear, 1U) System ID connector: System ID jackID iDRAC7 Enterprise: RJ45 (plain jack) Serial: D-sub (DB9 / DB25)DB9 Video (VGA): VGA (15-pin D-sub)VGA USB 1: USB-A USB 2: USB-A NIC 1: RJ45 (plain jack) NIC 2: RJ45 (plain jack) NIC 3: RJ45 (plain jack) NIC 4: RJ45 (plain jack) PSU 1: IEC C14 mains inlet PSU 2: IEC C14 mains inlet
Dell PowerEdge R620 rear panel (8 drive system, 2 PCIe slots). Click a port to identify it.
Get it in DaMatrix

PowerEdge R620 specifications

ModelDell PowerEdge R620
Form factor1U rack server
ProcessorsOne or two Intel Xeon E5-2600 or E5-2600 v2
Memory24 DIMM sockets, DDR3 ECC at 1066 to 1866 MT/s
Maximum RAM1536 GB LRDIMM, 512 GB RDIMM or 128 GB UDIMM
Drives4, 6, 8 or 10 x 2.5 in. hot-swap SAS, SATA or Nearline SAS (6 drive adds two PCIe Express Flash SSDs)
OpticalOptional SATA DVD-ROM or DVD+/-RW (8 drive system only)
ExpansionUp to 3 PCIe Gen 3 slots on three risers
Rear ports4 x 1 GbE (or 2 x 1 GbE + 2 x 10 Gb SFP+), iDRAC7 Enterprise port, serial (DB9), VGA, 2 x USB 2.0
Front ports8 drive: 2 x USB 2.0, VGA and vFlash slot. 10 drive: one mini USB
Power suppliesTwo hot-swap AC 495 W, 750 W or 1100 W, or DC 750 W or 1100 W
VideoIntegrated Matrox G200, 16 MB shared
Weight8 drive: 18.6 kg (41 lb). 10 drive: 19.75 kg (43.5 lb)
Operating temperature50 to 95 F (10 to 35 C), short periods down to 41 F or up to 113 F

Every port on the rear panel, explained

Click a card to light up those ports on the panel above.

4 network ports4 on the panel

Four integrated NICs in a row: either four 10/100/1000 RJ45 ports, or two gigabit RJ45 plus two 10 Gb SFP+ ports, depending on the network daughter card fitted.

Link light green means full speed, amber means a lower speed; the activity light blinks green when data moves.

iDRAC7 Enterprise port1 on the panel

The dedicated management port, far left. It only works with an iDRAC7 Enterprise license installed.

Patch it to your management network for remote power, console and firmware updates.

Serial port1 on the panel

A 9-pin DTE serial connector (16550 compatible) for a serial console.

VGA video1 on the panel

A 15-pin VGA output for a monitor or KVM. The 8 drive system has a second VGA port on the front.

2 USB ports2 on the panel

Two stacked USB 2.0 ports for a keyboard, mouse or KVM dongle. There is one more USB port inside the chassis.

System ID connector1 on the panel

A small round jack for the optional system status light on the cable management arm. The blue ID button is just to its left.

Power supplies2 on the panel

Two hot-swap supplies on the right, each with its own inlet. See power supplies for the matching rules.

Feed them from separate circuits so one can drop without taking the server down.

Also on the back

  • PCIe slots: this 8 drive layout has two, on riser 2 (left) and riser 3 (right). The 10 drive and 3-slot 8 drive layouts add riser 1.
  • System ID button: press to flash the ID lights so someone can find this server. Hold for more than 5 seconds during a hung POST for BIOS progress mode, or more than 15 seconds to reset iDRAC (if not disabled in F2 iDRAC setup).

PowerEdge R620 memory limits

There are 24 DIMM sockets taking DDR3 ECC memory at 1066, 1333, 1600 or 1866 MT/s. The maximum depends on the DIMM type:

DIMM typeSizesMaximum RAM
LRDIMM8, 16, 32 or 64 GB1536 GB
RDIMM2, 4, 8, 16 or 32 GB512 GB
UDIMM2, 4 or 8 GB128 GB

The minimum is 2 GB with one processor or 4 GB with two.

PCIe risers

RiserSlot
Riser 1Two half-height, half-length slots: x8 and x16
Riser 2One half-height, half-length slot, x8 or x16
Riser 3One full-height three-quarter-length x16, or half-height half-length x16

Riser 1 and the x16 link on riser 2 only work with both processors installed.

PowerEdge R620 power supplies

Two hot-swap bays take AC supplies of 495 W, 750 W or 1100 W, or DC supplies of 750 W or 1100 W. Both must be the same type and wattage, and AC and DC can't be mixed.

Supply handle lightWhat it means
OffNo power connected
GreenPower connected and the supply is working
Flashing amberProblem with the supply
Flashing greenHot-added supply doesn't match the other one

When fixing a mismatch, replace only the supply with the flashing light. Two identical supplies on different input voltages can also report a mismatch.

First boot: setup keys

F2
System Setup
F10
Lifecycle Controller
F11
Boot Manager
F12
PXE boot

Patch the iDRAC7 port to your management network, then set its address from the front LCD if your chassis has one, or from F2 System Setup.

Rack and room requirements

  • Normal operation is 50 to 95 F (10 to 35 C) at 10 to 80 percent humidity, out of direct sunlight.
  • It can run from 41 to 104 F for up to 10 percent of the year, and from 23 to 113 F for up to 1 percent, but only with redundant power supplies and without LRDIMMs, GPUs or PCIe SSDs in that range.
  • Don't cold-start it below 41 F (5 C). The operating altitude limit is 10,000 ft.

Frequently asked questions

How much RAM does the Dell PowerEdge R620 support?+

Up to 1536 GB with LRDIMMs, 512 GB with RDIMMs or 128 GB with UDIMMs, across 24 DIMM sockets.

How many drives does the R620 hold?+

Four, six, eight or ten 2.5 in. hot-swap drives depending on the chassis. The six drive version adds two PCIe Express Flash SSDs.

How many network ports does the R620 have?+

Four integrated NICs: four gigabit RJ45 ports, or two gigabit plus two 10 Gb SFP+, plus an iDRAC7 Enterprise port.

How do I reset iDRAC on a PowerEdge R620?+

Press and hold the system ID button for more than 15 seconds, unless that option is disabled in F2 iDRAC setup.

What power supplies does the R620 use?+

Two matching hot-swap supplies: AC 495 W, 750 W or 1100 W, or DC 750 W or 1100 W.

How many PCIe slots does the R620 have?+

Up to three PCIe Gen 3 slots on three risers. Riser 1 needs both processors installed.

Plan this rack server in your rack

The PowerEdge R620 is in the Dell library for DaMatrix, with every port mapped so you can drag it into a rack, patch it and print the documentation.

Related Dell devices

Summarized from the Dell PowerEdge R620 Owner's Manual. This page is a quick reference; check the full manual for safety warnings and model-specific limits.

Manufacturer names and trademarks belong to their respective owners. Device libraries are provided for identification and compatibility purposes and do not imply affiliation, sponsorship, or endorsement.